background image

Warranty Registration Form and Delivery Inspection Report

IMPORTANT!

Warranty 

Void

if card is not returned with 10 days.

All Applicable sections 

must 

be filled in.

This section to be filled out and signed by Dealer at time of delivery.

Warranty Registration

Customer’s Name

Dealer’s Name

Address

Address

City

State

Zip

City

State

Zip

Phone

CHECK ONE:

Loader / Tractor Model

Construction Use

Delivery Date

Agricultural Use

Model or Part #

Landscape Use

Serial #

Other:

Dealer Inspection

(check items applicable)

All Decals installed (see operator’s manual)

Review Operating and Safety Instructions

Hydraulic fittings tight and free of leaks

Guards and covers in place and secure

Fasteners tight

Does Product Function Properly

I have thoroughly instructed the buyer on the above described equipment. This review included: The Operator’s manual content,
equipment care, adjustments, safe operation and applicable warranty policy.

Date

Dealer’s Rep. signature

This section to be completed and signed by the customer

QUALITY ASSURANCE RATING

Question:

FFC

Local Dealer

Quality of Product: Appearance   . . . . . . . . . . . . . . . . . . . . . . . . .

Construction  . . . . . . . . . . . . . . . . . . . . . . . . .

Quality of Service   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Value (Priced Fairly)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Does it perform as claimed   . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

The above described equipment and Operator’s Manual have been received by me and I have been thoroughly instructed
as to care, adjustments, safe operation and applicable warranty policy.

Date:

Owner’s signature

NOTE!  Make one copy each for the dealer’s and owner’s records. Mail original to FFC Attachments.

Form MR00000-000 Rev. 09/04

FFC Attachments • 100 E. Lee Road • PO Box 122 • Lee, IL 60530 • 800-747-2132 • Fax 815-824-2071

www.ffcattachments.com

1

2

3

4

5

Excellent

Good

Average

Unsatisfactory

Poor

PLEASE TRI-FOLD AND AFFIX TAPE HERE

Summary of Contents for LAF2301




















Reviews: