background image

 

 

 

2

DEFINITION OF SAFETY TERMS AND SYMBOLS

Throughout this manual, the terms

 DANGER

,

WARNING

, and 

CAUTION

 are used to indicate the degree of hazard to 

personnel if proper safety procedures are not followed.  These words will be used in conjunction with the Safety Alert 
Symbol: a dark triangle containing a white exclamation mark. 

The Safety Alert Symbol means: 

ATTENTION!     BECOME ALERT!     YOUR SAFETY IS INVOLVED!

DANGER

Indicates an imminently hazardous situation which, if not avoided,  

WILL result in death or serious injury.

WARNING

Indicates a potentially hazardous situation which, if not avoided,  

could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation which, if not avoided, 

may result in minor or moderate injury; 

OR

may also be used to alert against unsafe practices which 

may result in personal injury.

ACCIDENTS CAN BE PREVENTED WITH 

YOUR HELP!

No accident prevention program can be successful 
without the wholehearted cooperation of the person who 
is directly responsible for the operation of the equipment. 

To read equipment accident reports from all over the 
country is to be convinced that a large number of 
accidents can be prevented only by operators who 
consistently anticipate the results of their actions and 
thus prevent accidents from ever occurring.  No power-
driven equipment, whether it is on the highway, in a farm 
field, or in an industrial plant, can be any safer than the 
person who is at the controls. 

If accidents are to be prevented [and accidents can be 
prevented], that prevention will come from equipment 
operators who accept their complete responsibility. 

The designer, the manufacturer, and the safety engineer 
all help create a safe product, but their combined efforts 
can be wiped out with a single careless act by the 
operator of that product. 

The best safety device is a careful operator.  FFC and 
your dealer ask that 

YOU

 be that careful, responsible 

equipment operator.

YOU

 ARE THE KEY TO SAFETY BECAUSE: 

YOU

 are responsible for the SAFE operation and 

maintenance of

YOUR

Backhoe. 

YOU

 are responsible to familiarize yourself, and anyone 

else who will assemble, operate, maintain, or work 
around this product, with the safety information 
contained in this manual. 

YOU

 are responsible to read ALL information contained 

in this manual to any operators or maintenance 
personnel who are not fully able to read the written 
English language.  Whether 

YOU

  read the manual as 

written or translate it into another language, 

YOU

  must 

make certain that all operators and maintenance 
personnel have a complete understanding of the full and 
exact contents of this manual.  Translations of this 
manual into other languages are available by submitting 
a written request to FFC. 

YOU

can reduce the risk of injury or death by following 

all safety precautions and by using good safety 
practices. 

Summary of Contents for LAF2301




















Reviews: