9
SAFETY DECALS & LABELS
Use part numbers to order replacements for lost or damaged decals. Be sure to read all decals before
operating the attachment. They contain information you need to know for both safety and longevity.
Placement or replacement of Safety Signs
1. Clean the
area of application with nonflammable solvent, and then wash the same area with soap and water.
2. Allow the surface to fully dry.
3. Remove the backing from the safety sign, exposing the adhesive surface.
4. Apply the safety sign to the position shown in the diagram above and smooth out any bubbles.
Instructions
1.
Keep all safety signs clean and legible.
2. Replace all missing, illegible, or damaged safety signs.
3. Replacement parts, for parts with safety signs attached, must also have safety signs attached.
4. Safety signs are available, free of charge, from your dealer or from SWEEPSTER.
Item Part
Qty Description
1.
50-0721
3 Label, Warning, Crush Hazard
2. RDL3132
2 Label, Amber, Reflective Tape, 2 x 6
3. RDL3131
2 Label, Red, Reflective Tape, 2 x 6
4.
50-0724
1 Label, Warning, High Pressure Fluid
5.
50-0737
1 Label, Warning, Pinch Point Hazard
6.
50-10017
1 Label, Warning, Avoid Serious Injury
9.
50-0775
2 Label, Warning, Crush Hazard
4. 50-0724
1. 50-0721
5. 50-0737
6. 50-10017
9. 50-0775
2. & 3. RDL3132 & RDL3131
Serial
Number Tag
Summary of Contents for V-Snow Blade
