background image

9

11.

  Make  sure  there  is  no  liquid  or  humidity  in  the 

outlet where the product plug is installed.

12.

 An omnipolar switch capable to disconnect power 

supply is required for installation. Disconnection from 
power supply shall be provided with a switch or an 
integrated fuse installed on fixed power supply according 
to building code.

13. 

The power supply cord (the cord with plug) shall 

not contact the hot parts of the appliance.

14. 

Unplug the unit during installation, maintenance, 

cleaning and repair.

15.

 Appliance is equipped with a 

type ‘’Y’’

 cord cable.

16.

 The circuit breaker switches of the cooker shall 

be placed so that end user can reach them when the 
cooker is installed.

17. 

Fixed connections shall be connected to a 

power supply enabling omnipolar disconnection. 
For appliances with over voltage category below III, 
disconnection device shall be connected to fixed power 
supply according to wiring code.

18. 

Do not remove ignition switches from the appliance. 

Otherwise, live electric cables can be accessed. It may 
cause an electric shock.

Summary of Contents for ES 9390
























Reviews: