Drill new 9mm hole
for aerial
Cut out the left and right wheel cases of
the front and rear bodyshell a little more
as pictured by using a scissors or a
model knife to prevent the bodyshell
from rubbing against the wheels.
Jeep
Position 55
Jeep
Marder
Marder
Marder
Remove the front and rear body part by
using a scissors or a model knife. Cut out
the bodyshell a little more within the area
of the track rods.
Cut out an opening on the right
side of the bodyshell for receiver
box respectively flexible aerial.
Cut out an opening on the left
side of the bodyshell for servo
arm respectively the brake rods.
Position 56