Manual ResistTel IP2 / IP152
Page 87
ExResistTel IP2 / IP154
•
The symbol on the display indicates that there has been a message sent.
2.
Use the arrow keys to select the desired entry.
3.
Respectively to the wanted calling mode, you can setup the call as follows:
a.
Lift off the handset (handset mode).
b.
Press the loudspeaker key (hands free mode).
c.
Press the headset key (Key
long (longer than a second) and then the
loudspeaker key ) (headset mode).
d.
Press key (short or long) or the key . With a configured headset you will
reach the headset mode otherwise the hands free mode.
3.3.5
Call Back
Up to 100 of the last incoming calls are saved automatically, together with the time
and date, and can be called back, if the number of the caller was transmitted.
01 06.02.10 11:30
Martin 73
02 06.02.10 11:30
Thomas 70
03 06.03.10 11:29
Peter 36
> Calls (inbound)
Figure 39: List of the Last Incoming Calls and Received Messages
Dialling numbers from the calling list
1.
In the initial condition, press the key (short). The list of the last incoming calls
is displayed (see Figure 39).
•
Success (connected/not connected).
The symbol
on the display indicates that there has been a call. A not
connected call will be displayed without a symbol.
•
The symbol on the display indicates that there has been a redirected call.
•
The symbol on the display indicates that there has been a transferred call.
•
The symbol
on the display indicates that there has been a dialled number
on a locked telephone.
Summary of Contents for ExResistTel IP2/IP154
Page 43: ...Manual ResistTel IP2 IP152 Page 43 ExResistTel IP2 IP154 Figure 9 Set View ...
Page 386: ...Page 386 Manual ResistTel IP2 IP152 ExResistTel IP2 IP154 ...
Page 387: ...Manual ResistTel IP2 IP152 Page 387 ExResistTel IP2 IP154 ...
Page 390: ...Page 390 Manual ResistTel IP2 IP152 ExResistTel IP2 IP154 ...
