FRIDGE
UNIT
36
37
>
Freezer compartment: from -15° C to -22° C
(from 5° F to -7.6° F), the default temperature,
which is recommended, is -18° (0° F)
>
Refrigerator compartment: from +2° C to +8° C
(from 35.6° F to 46.4° F), the default temperature,
which is recommended, is +5° C (41° F).
>
Cooler compartment: from -2° C to +2° C (from
28.4° F to 35.6° F), the default temperature, which
is recommended, is 0° C (32° F).
Warning
If the “keypad locked” message appear, si-
multaneously press the keys Menu and
Up/Down (Down) for 3 seconds.
Note
The displayed temperature may vary
slightly with respect to the set tempera-
ture if the doors are continuously opened
or insertion of room temperature food or
large quantities of food.
It takes 6 to 12 hours to reach the select-
ed temperature.
4.3 Information and malfunction
signals on the display
An integrated control system provides informa-
tion through luminous signals or text messages
shown on the display.
The information signal is always displayed with a
fixed text message, while a malfunction signal is
shown with blinking text.
The acoustic signal that accompanies some mal-
function signals can be deactivated by pressing
the Alarm key on the main control panel.
The list of malfunction signals is located in the
back of this manual.
5.1 Customization and Language
Settings
Note
To prevent an inadvertent change to the
settings the keypad is automatically
locked after a certain period of time.
To re-activate the Menu function, press si-
multaneously the Menu button and the
Down button for at least three seconds
or just press the Menu button again for
3 seconds.
The key lock can be disabled through the
specific function in the Settings menu.
It is possible to customized the functions of your
Fhiaba to adapt it to diverse usage needs, reset-
ting the main parameters (Settings) or activating
special functions (Functions).
Functions are visualized on the main display by
pressing the Menu button .
The Up/Down buttons permit scrolling the avail-
able functions, which can be selected by press-
ing the Enter button . The display visualizes the
current functioning status.
Using the Up/Down buttons , it is also possible
to scroll through the selected function, activating
or deactivating by pressing the Enter button .
Once the function is confirmed, the display will
automatically visualize the main menu to select
other functions.
At any time it is possible to return to the previous
selection through
the Menu button .
The language of the messages appearing on the
display can be changed by operating as follows:
Enter the Menu by pressing the Menu button
select Settings via the Up/Down buttons and
confirm via Enter .
Then select the Language function and the de-
sired language.
5.2 Special functions activated through
the Menu
To use special functions, select the Menu key and
use the Up/Down key to access the menu, con-
firming the selection
.
Dual Zone (0T, 0H models)
This function can be activated only on models fea-
turing a wine cellar without internal separator. It
allows to differentiate the temperature in the up-
per part of the cellar (warmer and therefore better
suited to keep red wines) from the temperature in
the lower part (colder and therefore better suited to
keep white wines).
Shopping TriMode
This function must be activated at least 24 hours
before inserting room temperature items into the
freezer, or several hours before placing into the
freezer previously frozen items which have been
subject to a slight temperature rise. This func-
tion is automatically deactivated when the pro-
grammed time period expires.
It is possible o program timed activation of the
function.
After a prolonged interruption of the electrical
power, it is necessary to reactivate the function.
How to activate:
How to deactivate:
Vacation TriMode
This function (recommended in case of prolonged
absences since it allows considerable energy sav-
ings) brings the Tri-Mode compartment tempera-
ture to - 18°C (46.4°F).
It is possible to program the duration, or it can be
manually deactivated upon re-entry after a period
of absence.
This function remains active even if during the pe-
riod of absence there is a prolonged interruption of
electrical power.
It is possible to program a period from 1 to 90 days.
Bottle Cooler
This function can be activated when it is necessary
to cool off beverages quickly, by placing them inside
the freezer compartment.
It is possible to select a duration of 1 to 45 minutes.
A sound signal will indicated when the optimal tem-
perature has been reached.
After removing the beverages, deactivate the sound
signal by pressing the Alarm button .
How to activate:
How to deactivate:
How to program timed activation:
How to activate:
How to deactivate:
How to program the duration:
How to activate:
How to deactivate:
How to program the duration:
5. SETTINGS AND SPECIAL FUNCTIONS
EN
www.fhiaba.com · info@fhiaba.com · Info Line +39 0434 420160
www.fhiaba.com · info@fhiaba.com · Info Line +39 0434 420160
