Farmer-Helper 25 & 27G
11
Revision06/2017
Guidelines for Regular Maintenance (continued)
Periodically check the floor apron chain for tension/tightness (refer to Figure 3A).
P rocedure for checking/ adjusting the floor apron chain:
a) Pull up
firmly
on the center slat o f the floor apron chain.
N OTE : The force required to adequately pul1up on the apron chain to determine the
tension measures approximately 30 lbs.
b) If you can lift
it higher than
five (5) inches, the chain is too loose.
c) If you can lift it
not higher
than three (3) inches, the chain is too tight.
d) If the chain needs adjustment, turn the front nut clockwise or counterclockwise until correct
tension/tightness is achieved. (See Figure 3B.) R epeat for the other side.
Make sure
that the chains on each side o f the apron are equally taut
Figure 3B - Adjusting the Floor Apron Chain
Summary of Contents for FH-25G
