7.2. Static state
When the wheelchair is not in use, the power must be switched off even for a short period
of time (see Figure A2). This will:
●
prevent accidental contact with the joystick, resulting in unexpected movement of
the wheelchair.
●
Prevent the wheelchair from being unintentionally operated by any electromagnetic
interference.
Please don't allow anyone other than you to touch the joystick controller. This will prevent
potential personal injuries if the wheelchair is moved unintentionally.
7.3. Weather defence measures
!
It is prohibited to use and store electric wheelchair in the rain, snow, icy or wet
environment. These weather conditions can seriously affect the function of the wheelchair.
Please keep the wheelchair in a clean, dry place.
If the equipment contacts the rain, snow, or in a high-humidity environment, there may be
a fault. Please avoid the wheelchair being exposed to extremely heat or cold
environments. Joy-Rider is not a fully waterproof wheelchair. High-humidity environments
can lead to dust or corrosion inside the wheelchair. If you are in any one of the above
environment, please immediately cover the wheelchair to prevent damage.
In order to avoid equipment failure, please follow the guidelines below:
●
Please avoid using or storing of the wheelchair in the following circumstances:
direct contact with water; extremely high or low temperature; high humidity
A2
!
11
