7.6. Weight distribution
In order to avoid overturning when driving the wheelchair, the balance and stability of
electric wheelchair cannot be ignored. The following factors will affect the weight
distribution of wheelchair:
●
Height and angle of seat.
●
The sitting position or weight-bearing position of user.
●
Tilting slope
●
The user's weight will affect the weight distribution of the wheelchair.
!
Please do not make self-modification or adjustment of the structure of Joy-Rider.
7.7. Getting on and getting off wheelchair
It is recommended for you to take the armrests as supporting points and NOT the joystick
when you move into or out of the wheelchair. Excessive pressure on the joystick can
cause it to be damaged. Please note the following points in order to reduce the likelihood
of falling:
●
Before getting on or off the wheelchair, make sure the power supply is off and the
brake levers are in the locked position. Check that the wheels make no
movement.
●
Position the wheelchair closest to the target position to minimize the risk of falling
in the process of leaving the wheelchair.
●
Consult your health care provider for the method of getting on and getting off the
wheelchair.
●
Please do not stand on the footrest while getting on or off the wheelchair.
●
Position your feet in front of the footrest to avoid getting them trapped.
●
When you sit in the wheelchair, do not lean outside of the wheelchair as it can
seriously affect the balance of the wheelchair and may result in the wheelchair
turning over.
●
Please don't take heavy objects when sitting in the chair as this can cause in
imbalance.
●
Please do not move your weight excessively toward the upper part of the backrest
to prevent overturning of wheelchair or damage to the back.
13
