8.2. The following table shows various states of the battery power
display
※
Immobilisation Feature
After switching on the power supply, press and hold the power button for 4~5 seconds to
enable the immobilisation feature. This makes the joystick inoperable.
To turn off this feature, press the + acceleration button for 3 times within 10 seconds to
unlock.
Illumination display
Description
Reason
Remarks
No LED’s on
Power supply is
switched off or in
standby state, or the
system has entered
sleep mode.
All LED lights on
The power supply is
on and battery is fully
charged
As the battery is used,
the number of LED's
illuminated will reduce
towards Red.
Red LED light on
the left side flashes
Battery capacity is
not sufficient.
Please charge the
battery as soon as
possible.
LED’s illuminate
once from left to
right in order
The Brake Levers
are in the Freewheel
position
Move the brake levers
to the locked position
to operate the chair
under power
Only one light
repeatedly cycles
from right to left.
The wheelchair has
been immobilised
※
and is waiting for
unlocking.
Press the +
acceleration button for
3 times within 10
seconds to unlock.
The LED's are
repeatedly blinking
from left to right in
order.
The battery charger
is connected to the
wheelchair and is
charging.
The joystick cannot be
operated when the
battery is being
charged.
!
!
!
!
!
!
17
