11.4.Charge
The battery is charged by general AC power (AC 110-220V 50-60HZ). The charging port is
located under the front of the joystick. (Figure E6).
1. Insert the mains cable of the supplied battery charger into the mains power socket.
When LED shows red, it is in standby mode. Connect the round 3-pin socket to the
charging port under the joystick (Figure E6). When the LED on the charger shows
orange after flashing, the battery is being charged.
2. When the charger LED becomes green from orange, the battery is now fully charged.
3. After charging, it is recommended to unplug the charger plug from the power socket
and then unplug the charger connector on the joystick.
4. When unplugging the battery charger from the joystick, firstly press PUSH (Figure E6).
Failure to correctly release the charging cable by pressing PUSH may result in damage
to the cable.
5. Please charge batteries at the appropriate temperature. The recommended ambient
temperature for charging is -5
℃
to 40
℃
.
!
E6
23
