Display panel mount for magnetic band
F8P
Data: 13/01/16
F8P_ing.doc
pag 6/9
Display icons
1.
Indicator of flat battery: begins to blink when the level of loading goes under a certain value
and when it keeps switched on its necessary to change the batteries within 1 month.
2.
Indicator of absolute quota
3.
Indicator of relative quota
4
. Indicator of mm
5.
Indicator of inches
6.
Indicator of degrees
7.
Indicator of positive Offset: indicates that the measure is corrected by a positive offset
8.
Indicator of negative Offset: indicates that the measure is corrected by a negative offset
9.
Indicator of values changing: it blinks during the programming phase
10.
Indicator of origins: indicates that the origin changing mode is opened
11.
Indicator for origin 1
12.
Indicator for origin 2
Error message
RX(U
RX(U
RX(U
RX(U
: the current displayed value passed the maximum value that can be visualized (possible
range: from –999999 to 999999).
Magnetic strip mounting
The magnetic strip P50 consists of a magnetized plastic ferrite strip with alternate magnetic poles
of 5 mm pitch, carried by a ferromagnetic steel strip. Mechanical protection of the plastic ferrite
strip is supplied by a non magnetic steel strip with thickness 0,2mm.
The magnetic strip is assembled by sticking it with a bi-adhesive tape. The surface has to be
smooth, clean and dry: is advisable to clean it with a degreasing product (isopropyl alcohol, ethyl
alcohol, solvents, etc). The magnetic strip has to be stuck holding the plastic ferrite side in the
direction of the sensor, which means the steel side leaned on the stand surface. Fixed the
magnetic strip, to keep off damages due to abrasions or grazes of the plastic ferrite strip, is
advisable the appliance (always bi-adhesive) of the non magnetic protection strip. The optimal
ambient temperature for stick the bi-adhesive tape is over 10°C. The maximum adherence of the
tape works out after 48 hours (about) of the application and is kept between –10 and 80°C.
1,7
non magnetic steel strip
(mechanical protection)
plastic ferrite strip
steel strip
(plastic ferrite support)
10
sensor side
1
2
7 8
10
3
9
6
5
4
11
12
