EX355
W2-4-1
PUMP DEVICE
SM6200
3. Remove hydraulic oil tank cap. Connect a vacuum
pump to maintain negative pressure in the hy-
draulic oil tank.
NOTE -
Be sure to run the vacuum pump continu-
ously while working.
Removal
1. Disconnect connectors.
WARNING
Pump device weight: 195 kg (430 lb)
2. Disconnect all hoses and pipes from the pump
device.
: 17 mm, 19 mm, 22 mm, 36 mm
: 10 mm
3. Attach eyebolts (M12, Pitch 1.75, Length 30) to
the pump device, then fasten a hoist.
4. Remove pump device mounting bolts to remove
pump device.
: 17 mm
Installation
1. Install the pump device with pump device mount-
ing bolts.
2. Connect all hoses and pipes.
3. Connect connectors.
4. Remove the air breather plugs on top of the
regulators, then fill hydraulic oil into the pump
casings.
IMPORTANT -
Be sure to check hydraulic oil level
and oil leakage, after assembling.
Bleed the air from the pump. (Refer to W1-1-2)
REMOVE AND INSTALL PUMP DEVICE
WARNING
Escaping fluid under pressure can penetrate the skin, causing serious injury.
Avoid the hazard by relieving pressure before disconnecting hydraulic or other lines.
Hydraulic oil may be hot just after operation. Hot hydraulic oil may spout, possibly causing severe burns.
Be sure to wait for oil to cool before starting work.
The hydraulic oil tank cap may fly off if removed without releasing internal pressure first. Push the air release
valve on top of the hydraulic oil tank to release any remaining pressure.
Preparation
1. Park the machine on a firm, level surface.
2. Stop the engine. Push the air release valve on top
of the hydraulic oil tank to release any remaining
pressure.
Wrench
Remark
Size (mm)
N m
kgf m
lbf ft
: 36
69
7
51
Hose
: 10
88
9
65
Bolt
: 17
49
5
36
Bolt
: 19
29
3
22
Hose
: 22
49
5
36
Pipe
Tightening Torque
Air Bleed Plugs
Summary of Contents for EX355 Tier2
