Spare Tire Stowage
Rotate the jack wrench tool on the winch drive nut
clockwise (the flat tire must not be connected to the
winch) until effort becomes heavy and an audible
click is heard indicating the winch is properly stowed
.
Cover the flat tire with the Emergency Spare Tire
Bag and stow the flat tire into the trunk
.
CAUTION!
The winch mechanism is designed for use with
the jack wrench extension tool only
.
Use of air
wrench or power tool may damage the winch
.
Preparations For Jacking
1
.
Park the vehicle on a firm, level surface
.
Avoid
ice or slippery areas
.
WARNING!
Do not attempt to change a tire on the side of
the vehicle close to moving traffic
.
Pull far
enough off the road to avoid being hit when
operating the jack or changing the wheel
.
2
.
Turn on the Hazard Warning flasher
.
3
.
Apply the parking brake
.
4
.
Place the gear selector into PARK
.
5
.
Place the ignition in OFF mode
.
6
.
Block both the front and rear of the wheel
diagonally opposite the jacking position
.
For
example, if the right front wheel is being
changed, block the left rear wheel
.
NOTE:
Passengers should not remain in the vehicle when
the vehicle is being jacked
.
Jacking Instructions
WARNING!
Carefully follow these tire changing warnings
to help prevent personal injury or damage to
your vehicle:
• Always park on a firm, level surface as far
from the edge of the roadway as possible
before raising the vehicle
.
Wrench Rotation
Wheel Blocked
97
Summary of Contents for 500 L 2019
