The display will show the following
information
fig. 99
:
– compass representation indicating
the car position (in degrees) with ref-
erence to the North;
– longitude, latitude and height;
– visible satellites number;
– destination (available only with nav-
igation on);
– time of arrival and distance to des-
tination (available only with navigation
on).
Pressing “ESC”
14-fig. 1
or “NAV”
18-fig. 1
takes back to the main nav-
igation screen.
ATLAS
: enables map drawing in at-
las mode (for further details see sec-
tion “ATLAS” on the following pages).
DETOUR
: allows the user to
choose (if possible) an alternative
route to reach the selected destina-
tion, avoiding a specified portion of the
currently calculated route.
97
CONNECT NA
V+
To activate this function, select the
route portion to be avoided
fig. 100
by turning the knob
15-fig. 1
and
pressing it to confirm.
The display will then show the new
distance and the time necessary to
reach the destination
fig. 101
.
Selecting and confirming “YES” or
“NO” by turning and pressing the knob
15-fig. 1
, the user can accept or reject
the new route.
If there is no alternative route, then
the display shows “No alternative
route”
fig. 102
.
MAP
: activates the map mode. The
display shows map, route (if present),
car position (town and street names),
icons of next two crosses (only if
route is present)
fig. 103
.
To modify the map scale, proceed as
follows:
– turn the knob
15-fig. 1
and select
the required scale;
– press the knob
15-fig. 1
to con-
firm.
When you approach a crossroads,
the map will be replaced with an en-
largement of the surrounding area
fig.
104
(crossroads zoom function, if ac-
tuated in “map preference”).
DEST 1
DEST 2
INFO
ATLANTE
DETOUR
MAP
fig. 100
F0Q3131g
06
DEST 1
DEST 2
INFO
ATLANTE
DETOUR
MAPPA
Select address
Visualization
Zoom
Delete destination
Set
Voice bookmarks
fig. 101
F0Q3132g