31
confIguratIon
1. Open the Configuration interface.
2. Go to
>
Network
>
Wi-Fi connection.
3. Set Network connection type to Static/Manual.
4. Input the IP address you want to set for the gateway.
How to set dynamic IP Address:
1. Open the Configuration interface.
2. Go to
>
Network
>
Wi-Fi connection.
3. Set Network connection type to DHCP.
Resetting network settings
Resetting network settings will restore Wi-Fi factory settings.
Using button on the cover:
1. Hold the D button for 20 seconds.
2. Click when the indicator is blinking red.
Using Recovery Interface:
1. Open the Recovery Interface.
2. In Network Settings section click Reset.
16.3: SECURE CONNECTION
The gateway can use HTTP and HTTPS protocols for communication.
Use HTTPS to ensure security by encrypting communication.
To set connection type:
1. Open the Configuration interface.
2. Go to
>
Network
>
Secure Connection.
3. Select connection type:
• HTTP – standard connection without additional encryption,
• HTTPS – secure encrypted connection,
• HTTP/HTTPS – the gateway will accept both types of connection.
4. Save.
