41
automatIon
6. Adjust the correct position and then click Save this position.
7. If the roller shutter has not reached the desired level, you can repeat
the configuration by clicking Configure again.
22.9: CHANGING NAME
1. Open the Configuration interface.
2. Go to
>
Scenes
.
3. Click on the frame next to the scene you want to rename.
4. Enter new name.
22.10: DISABLING/ENABLING
1. Open the Configuration interface.
2. Go to
>
Scenes.
3. Click Disable/Enable button next to the scene you want to disable/
enable.
22.11: CHANGING TRIGGERING MODE (MANUAL/AUTO)
In auto mode, the scenes runs automatically, when triggers and
conditions are met, in manual mode the scene can be triggered only
manually by the user.
1. Open the Configuration interface.
2. Go to
>
Scenes.
3. Click toggle to change triggering mode.
22.12: CHANGING OTHER SETTINGS
1. Open the Configuration interface.
2. Go to
>
Scenes.
3. Click
>
to expand the scene.
4. Edit scene settings:
• Allow to restart a running scene – if set to “Yes”, every new activation
of the scene restarts it, if set to “No”, scene can’t be activated again if
it is already running.
• Category – categories are used for filtering scenes by type.
• Hidden scene - tick to hide the scene in the interfaces.
• Require PIN code - tick if you want to secure the scene by requiring a
PIN code to run.
• Icon - the icon that will represent the scene.
5. Save.
