background image

3

DESCRIPTIOn AnD FEATURES

Main features of FIBARO KeyFob:

•  Compatible with any Z-Wave or Z-Wave+ Controller,
•  Supports Z-Wave network Security Mode with AES-128 

 

encryption, 

•  Battery powered,
•  Completely wireless,
•  Pocket size,
•  Equipped with 6 easily recognizable buttons,
•  30 different actions, single/double/triple click, hold for each 

button and sequences,

•  Easy to operate menu,
•  Actions are confirmed by the built-in LED diode.

FIBARO KeyFob 

is a Z-Wave Plus compatible, battery-powered, 

compact remote control.
Six buttons allow you to control other devices through the Z-Wave 

network and run various scenes defined in FIBARO System. 
Configure actions for one, two, three clicks, holding the button and 

button sequences to suit all your needs.
Built-in locking system will ensure that unauthorized person will not 

take control of your home.

#1: Description and features

FIBARO KeyFob is a fully 

compatible Z-Wave PLUS device.

NOTE

This device may be 

used with all de-

vices certified with 

 

the Z-Wave Plus cer-

tificate and should be 

compatible with such 

devices produced by 

other manufacturers.

i

NOTE

Z-Wave Controller 

must support Z-Wave 

Security Mode in 

 

order to fully utilize the 

product.

i

Summary of Contents for KEYFOB FGKF-601






















Reviews: