4 Web Configuration Guide
4.4.4 HTTPS
The ONU provides the HTTPS function. The HTTPS is the HTTP
channel for security. It is built on the SSL+HTTP protocol, which can
perform encryption transmission and identity authentication.
1.
Select
Security
in the navigation bar and select
HTTPS
in the
left link bar to open the HTTPS function configuration tab, as
shown in Figure 4.18.
Figure 4.18
HTTPS
2.
Select to
Enable
or
Disable
the HTTPS function as required.
Caution:
After enabling the HTTPS function, log into the Web GUI. The
protocol type in URL should be https and the management IP
address should be added with the port number 4433, e.g.
https://
192.168.1.1:4433
.
3.
Click
Apply
to save and apply the configuration.
4.5 Application
The following introduces how to configure the DDNS, port
forwarding, NAT, and network diagnosis in the Web GUI.
53
Summary of Contents for AN5506-01-A
Page 77: ......