3 Product Installation
19
Step 3
Observe the status of the LOS indicator LED. If the LOS indicator
LED is extinguished, the optical fiber connection is normal.
Otherwise, check whether the optical fiber is correctly connected.
Step 4
Observe the status of the PON indicator LED. If the PON
indicator LED is illuminated, the equipment registers to the
GPON system normally. Otherwise, check the ONU
authentication status at the OLT side.
Step 5
Observe the status of the LAN indicator LED. If the LAN indicator
LED is illuminated or blinking, the network cable connection is
normal. Otherwise, check whether the network cable is correctly
connected.
Step 6
Observe the status of the Phone indicator LED. If the Phone
indicator LED is extinguished before off-hook and becomes
illuminated after off-hook, the twisted-pair cable connection is
normal. Otherwise, check whether the twisted-pair cable is
correctly connected.
Step 7
During operation of the equipment, ensure the ventilation to
avoid abnormal events caused by overheating. When any
abnormality occurs, contact the local office of FiberHome for
replacement.