4 Web Configuration Guide
Figure 4.41
UPnP
2.
Select to
Enable
or
Disable
the UPnP function as required.
3.
Click
Apply
to save and apply the configuration.
4.5.7 DMZ
When the ONU is working in the routing mode, users should enable
the DMZ function if a host at the WAN side needs to access a
certain host at the LAN side. The ONU will forward all the IP packets
from the WAN to the designated DMZ host.
1.
Select
Application
in the navigation bar and select
DMZ
in the
left link bar to open the DMZ configuration tab, as shown in
Figure 4.42.
Figure 4.42
DMZ
2.
Configure relevant parameters according to the requirement.
Table 4.23 describes the parameters.
3.
Click
Apply
to apply and save the configuration.
118
