Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved
FIBOCOM L610-LA Series Hardware Guide
Page 10 of
49
Interface
Antenna
Antenna: main x 1, WIFI x 1
Function
interface
USIM 3.0V/1.8V
USB 2.0 x 1
System status indication
ADC*3
Software
Protocol stack
Embedded TCP/IP and UDP/IP protocol stack
AT command
3GPP TS 27.007 and 27.005, and proprietary FIBOCOM AT
Firmware update USB
Voice service
AMR, caller ID, call forwarding, call hold, call waiting and multi-party call, etc.
SMS service
Point-to-point MO, MT, cell broadcast, Text and PDU modes
Note:
When the normal operating temperature range of -30°C ~+75°C is exceeded, the RF
performance of the module may slightly exceed the requirements of 3GPP Specification.
2.3 Hardware Diagram
Figure 2-2 hardware diagram shows the main hardware features of L610 module, including baseband and
RF features.
Baseband includes:
GSM/LTE TDD/LTE FDD controller
PMIC
UART, SIM, PCM, I2C, SPI, SDIO, ADC, KEY
RF includes:
RF Transceiver
RF PA
RF filter
Antenna