Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved.
FIBOCOM MC610 Series Hardware Guide
33/70
3.3.3 Module Reset
There are two reset methods for MC610 series modules: hardware reset and AT command reset.
Table 3-8 Module reset mode
Reset Mode
Reset Method
Hardware reset
Provide EXTRST with a Tst (100 ms) low level, and then rise it.
AT command reset
AT+CFUN=15
3.3.3.1 Reset Circuit
The reset reference circuit is shown in the following figure, which is similar to PWRKEY control circuit.
Customers can use OC/OD drive circuit or button to control EXTRST pins.
Figure 3-8 EXTRST reset OC/OD reference circuit
Another reset control is shown in the following figure:
