23
6.7.1 Automatic Accumulation
13
Automatically accumulation is activated when Auto Accumulation is set to
On
in
Auto 1, Auto 2, Auto 3 or Manual mode is selected in F16 and/or F17.
Under the automatic accumulation mode, corresponding results will be
accumulated automatically.
6.7.2 Manual Accumulation
14
Manual Accumulation is activated when scanner, PC or CMD mode is selected
for
both
F16 and/or F17.
Under the Manual Accumulation mode, press
[Print/M+]
to accumulate the
current value to memory.
6.7.3 When data is accumulated to memory
15
16
17
1.
When a result is accumulated to memory, this instrument displays
“
n____x
”.
M+ Indicator
appears to indicate that memory contains
stored data. “x” means the total number of transactions accumulated to
memory.
2.
This instrument returns to normal display status after 2 seconds.
6.7.4 Memory recall and clearance
Accumulation data will be stored in memory and will not be erased by normal
power off (by pressing the
[Power/Zero]
key) process. But changing weight unit
or to another working mode will automatically erase accumulation data stored.
Follow below procedures to recall and clear accumulation data.
1.
Press
[MR]
to recall total accumulated weight.
2.
Instrument flashes between “A____Y” (Y means the number of
13
Refer to
6.7.1
for setting details.
14
Refer to
6.7.2
for setting details.
15
Memory Accumulation Function accumulated weight results only.
16
When F16 and F17 is set to mode Auto1~3, unstable result or result which is less than
20d (or 20d
1
for dual weighing range/interval mode) will not be accumulated to memory.
17
All data stored will be erased when weight unit or working mode is changed.
Summary of Contents for CSa
