30
7.
Instrument displays print format. 7 parameters (Lab 1, Lab 2, Lab 3,
Lab 4, Lab 5, LP-50 and TSC). Press
[Func]
or
[Unit]
until the preferred
parameter appears then press
[Print/M+]
to save.
•
Lab 1 = Output in Landscape direction. If Lab 1 is selected, refer to
10.3.3.1
for other settings.
•
Lab 2 = Output in Portrait Direction. If Lab 2 is selected, refer to
10.3.3.2
for other settings.
•
Lab 3 = Database output mode.
•
Lab 4 = Journal output format with gross and net weight of each
individual transaction. This format supports weighing, piece count
and ATM mode only. Refer to
10.3.3.3
for other settings.
•
Lab 5 = Journal output format with time and net weight of each
individual transaction. This format supports weighing, piece count
and ATM mode only. Refer to
10.3.3.3
for other settings.
•
LP-50 = Output to LP-50 label printer. Refer to
10.3.3.4
for other
settings.
•
TSC = Output to TSC label printer. Refer to
10.3.3.4
for other
settings.
10.3.3.1 Other settings if Lab 1 is selected
1.
Instrument displays Line number. Line number is the number of
lines in between which the report heading is repeated. Line number
should be from 00~99. 00 means no header output. Input the
desired line number then press
[Print/M+]
to save.
2.
At this point, Lab 1 setup is completed.
10.3.3.2 Other settings if Lab 2 is selected
1.
Instrument displays number of copy to generate each time. 8
parameters (1~8) are available. Press
[Func]
or
[Unit]
until the
preferred parameter appears then press
[Print/M+] t
o save.
2.
At this point, Lab 2 setup is completed.
Summary of Contents for CSa
