Working on the machine
FLA 1250 H
29
INNOVATIVE TECHNOLOGY FOR ALL SEASONS
7.4.2 Assembly
The assembly should take place in the exact reverse sequence of the disassembly with
the same tools!
1. place the pick-up shaft upwards with the assistance of another man from the bottom into
the machine
2. insert the 2 screws SW19 in the chain tensioner
3. position the sprocket wheel on the shaft
4. assembly of the sprocket wheel, 1 screw SW17
5. place the right flange bearing and mount with 2 screws SW19
6. mount the left flange bearing, 2 screws SW19
7. tighten the chain tensioner, 1 screw SW19
8. place the left housing cover and tighten, 4 screws SW13
9. place the left housing cover and tighten, 4 screws SW13
10. position the side brush and, depending on the position (marking), tighten with 4 screws
SW17
11. mount the hydraulic hose cover, 1 screw SW13