background image

OPERATION INSTRUCTIONS

Control Panel Operating Instructions

Child

 Lock

Press and hold for 5 seconds to turn ON/OFF 

the child lock. All buttons, except the child 

lock, are disabled when the child lock is ON.

Air quality is classified into five levels: Healthy, Good, Fair, Unhealthy, and Poor.

The different colors of the air quality indicator light represent the air quality in

different states.

IAQ Note

Warning

- The sensor and air purifier are not medical devices and the information 

they provide is not intended to diagnose,treat,cure,or prevent any disease or 

condition.Consult your doctor if you are unsure what levels of particulate matter 

are safe for you and visit www.airnow.gov for more information on particulate 

matter and all aspects of air pollution.

    

Air

Speed

Air Quality Indicator

Poor

5

Red

Unhealthy

4

Orange

Fair

3

Yellow

Good

2

Green

Healthy

1

Blue

No    Symbol        Symbol

Meaning

Name

Filter 

The filter indicator will blink when the filters

need to be checked or replaced. After the 

filters have been inspected and/or replaced, 

press and hold the filter indicator for 

5 seconds to reset the filter indicator.

06

05

Summary of Contents for TRIO Plus S











Reviews: