www.fi eldcontrols.com
Please retain these instructions after installation.
This device
MUST
be installed by a qualifi ed agency in accordance with the manufacturer's installation instructions. The defi nition of
a qualifi ed agency is: any individual, fi rm, corporation or company which either in person or through a representative is engaged
in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the
precautions required, and has complied with all the requirements of the authority having jurisdiction.
Installation Date:
Installed By:
Phone:
P/N 78010007000 05/17 Rev B
VentCool™ 1.8
WHOLE HOUSE FAN
ITEMS INCLUDED (GENERATION 1 & 2):
• Fan assembly with electrical control box
• Chain (25 ft.)
• Duct tape (30 ft.)
• 7 ft. of acoustic fl ex duct (16” diameter)
• Backdraft Damper; Backdraft Damper Transition
Cone; and, ¼” Phillips head screws (12)
• White cube core grille & White phillips head screws
(8)
• Wood screws (8)
• Self-tapping sheet metal screws (4)
• S-Hooks
(4)
• Control Package, including: Control box; Wall
Controller Switch with Mounting Bracket; and Red
CAT-5 cable (50 ft.)
SUPPLIES NOT INCLUDED & REQUIRED TOOLS:
• Phillips head screw driver
• Scissors or Knife
• Pliers
• Drywall
Cutter
• Cordless screwdriver with Phillips head and mis-
cellaneous drill bits
• High quality latex caulk
• Lumber matching dimensions of the attic joists
(e.g. 2”x6”, 2”x8”, etc.) and cut to fi t according to
the INSTALLATION: FRAMING section.
• At least 4 additional wood screws
• A
ladder
INSTALLATION MANUAL
