Field of View GeoSnap Basic Manual 28
FIRMWARE UPDATE ERROR CODES
LED Error Code
Action
Alternating white and green LEDs
There is an error message that has been printed to an
update_note.txt file on the microSD card.
1.
Unplug power from the GeoSnap
2.
Remove the microSD card and insert into your computer
3.
Open the update_note.txt file located in the root directory
of the microSD card
4.
Read the error message and follow the corresponding
instructions
Alternating white and red LEDs
There is a problem reading the microSD card and there is no program
loaded on the GeoSnap.
1.
Unplug power from the GeoSnap
2.
Ensure there is a microSD card inserted in the GeoSnap with
a valid .fvx file in the root directory
3.
Re-try the firmware installation
Alternating green and red LEDs
The microSD card is corrupted and/or not formatted correctly.
1.
Unplug the battery from the GeoSnap
2.
Remove the microSD card and insert into your computer
3.
Re-format the card, ensuring the file system is set to FAT32
4.
Re-copy
the .fvx file to the microSD card’s root directory
5.
Safely eject the microSD card from your computer
6.
Insert the microSD card into the GeoSnap and re-try the
firmware installation. If this error persists, use a new
microSD card