Step 6:
1. Connect the hopper assembly (#6) and hopper assemble tube (#14) using hex bolt
M6x40 (#3),big flat washerØ6(#4) and hex lock nut M6 (#15), then tighten.
2. Connect the gauge base plate(#31) center spacer busing(#30) and hopper
assembly (#6) using hex bolt M6x60(#60), big flat washer Ø6 (#4) and hex lock nut
M6 (#15), then Connect the lower hole of gauge base plate (#31) and hopper
assembly (#6) using hex bolt M6x16(#5) and hex lock nut M6 (#15). Then tighten
all the bolts.
3. Attach the gauge base plate assembly (#34) onto gauge base plate (#31) using
hex bolt M6x16(#5) and hex lock nut M6 (#15). Then tighten.
10
