Page of 15
4
SAFETY PRECAUTIONS AND OPERATION RULES
1. Note the following in order to avoid fertilizer burn:
a.
The seed rate should be controlled according to your field condition.
2. Always inspect, maintain or adjust the seeder after each use.
3. While operating the seeder, keep area clean, free of clutter and well lit. Keep children and
bystanders away. Distractions can cause you to lose control, so bystanders should remain at a
safe distance from the work area.
4. The seeder should raise and lower smoothly.
5. The seeder should be inspected prior to each use. Carefully check all bolts, nuts, chains
sprockets etc. to make sure they are in good condition and properly tightened. Keep guards in
place at ALL times.
6. Keep the hopper clean and make sure there is no moisture inside before you fill with seed and
fertilizer.
7. Working speed can be 3 -5 miles/hr.
8.
DO NOT
stand/sit between the seeder and the tractor/ATV/UTV while operating.
9.
DO NOT
go in reverse or turn sharply while seeder is in the ground.
10. During planting, avoid unnecessary stopping in the field to maintain consistent seed spacing.
11. Driver should have experience and be familiar with using this type of equipment.
12. The tractor/ATV/UTV should be stopped when adding seed and performing maintenance.
13.
DO NOT
go under the seeder for inspecting or repairing while seeder is in the up position.