Page of 15
7
Step #8:
Open the material box
‘s cover plate, Close the two hose plate covers (#I2), then Close the front
eight plate covers (#H6), put the fertilizer into Hopper I, and close other eight plate covers (#H6), put
the seed into Hopper II. Close the material box.
Step #9:
Turn the Control hand wheel (#E8) to adjust the seed rate, turn clockwise to reduce the rate,
counter clockwise to increase the rate.
Step #10:
Turn the Transmission rod (#G20) to adjust the seed/fertilizer depth, turn clockwise for shallow
depths and counter clockwise for deeper depths.