EN
1
3
FDAH 200
2
Assembly
BEFORE USE
Before using this product, read the owner's manual completely and familiarize yourself
thoroughly with the product and the hazards associated with its improper use.
Perform the air purge procedure. (See System Purge Procedure.)
Check and that the pump operates smoothly before putting into service.
Inspect before each use. Do not use if bent, broken or cracked components are noted.
Block the vehicle’s wheels for lifting stability. Secure the load to prevent inadvertent shifting and
movement
Position the jack near desired lift point.
Set the Parking Brake in the vehicle.
Refer to the vehicle manufacturer owner’s manual to locate approved lifting points on the
vehicle.
Position the jack so that the saddle is centered and will contact the load lifting point firmly le the
handle; ensure to align with slots.
Close the release valve by turning it clockwise until it is firmly closed.
OPERATION
RAISING THE JACK
1.
2.
3.
4.
5.
6.
7. Jack is now ready for use. Check for proper
pump action. (Repeat steps if neccessary).
6. Turn release valve clockwise to the
closed position.
Summary of Contents for FDAH 2002
Page 1: ...FDAH 2002...
