background image

OPERATING INSTRUCTIONS

9

. DISPOSAL

INSTRUCTIONS AND INFORMATION ON DISPOSAL OF USED 

PACKAGING

Put any used package material to the place determined by the municipality for waste disposal.

DISPOSAL OF USED ELECTRIC AND ELECTRONIC EQUIPMEN

This symbol on products or accompanying documents means that used electric or 
electronic products must not be put to ordinary municipal waste. Hand over such products 
to determined collection points for proper disposal, restoration and recycling. Alternatively, 
in some countries of the European Union or other European countries you can return your 
products to your local dealer when you buy an equivalent new product. By dutiful disposal of 
this product you can preserve precious natural resources and you help prevent any potential 
adverse effects on the environment and human health which could be the results of wrong 
waste disposal. Ask your local authority or the nearest collection point for additional details. 
In case of improper disposal of this waste kind penalties can be imposed in accordance 
with national regulations.

FOR COMPANIES IN THE EUROPEAN UNION COUNTRIES

Should you want to dispose of electric and electronic devices, ask your dealer or vendor 
for necessary information.

DISPOSAL IN OTHER COUNTRIES OUTSIDE THE EUROPEAN UNION

Should you want to dispose of this product, ask your local authorities or your dealer 
for necessary information about disposal method

This product fulfils all basic requirements of the EU directives that apply to it.

Text, design and technical specifications can change without prior notice and we reserve the right for 
their change.

HYDRAULIC FLOOR JACK

20 

EN

Disposal

Summary of Contents for FDAH 2002





















Reviews: