Fieldmann FDAK 12011, Instruction Manual

EN

5

INSTRUCTION MANUAL

FDAK 12011

Tires:

Push the valve lever connector onto the valve and close by moving the lever 

downward.

Connect the power supply cable plug to the cigar lighter socket and turn the 
ON/OFF switch to ON.
On reaching the required pressure remove the valve lever connector from the 

valve spindle and disconnect the 12V plug from the socket.

Inflatables:

Select a matching adapter and attach to the valve lever connector .Close the 

connector.

Insert the adapter into the item to be inflated.

Connect the power supply cable plug to the cigar lighter socket and turn the 

ON/OFF switch to ON

On reaching the required pressure remove the valve lever connector from the 

inflated item and disconnect the 12V plug from the socket.

This compressor is not designed for long continuous operation. With excessively 

long operation the compressor will be overheated and will be damaged. If 

operated carelessly or if the external metal parts become hot (detectable by 

touch), it means that the compressor has been switched on for too long time 

and is overheated. In this case switch off the compressor immediately and 

leave it for to get cool (about 20 minutes) always after 10 minutes of continuous 

operation.

This compressor may also be operated from a 12V battery charger. However to 

avoid damage to compressor and charger 10 Amp or more are required.

TROUBLESHOOTING:

Compressor does not start /fuse blows:

Plug can be inserted deeply into the hole and can be turned in either direction.

Remove dirt from hole and plug. Use a non-conducting probe, never metal or 

fingers.

Check cigar lighter fuse. Minimum capacity 10 Amp. Plug disconnected

.Compressor runs but does not inflate:

Connector –with dosed lever –should sit tightly in the valve.

Check the item to be inflated for leaks.  Check hose and connections for 

cracks and leaks

Compressor works too slowly:

Overheating after excessively long operation. Disconnect plug and leave to 

cool for 20 minutes.
Voltage too low. Check battery.

1. Switch ON/OFF

2. Pressure Gauge

3.Supply Lead (Power Cord)

4. Adaptors

5.Air Output Hose