EN
11
Specific safety instructions
FDB
P
200951-E
It is prohibited to use damaged accessories.
Personal protective equipment has to be used. According to condition a face shield or
safety goggles have to be used. Use dust mask, hearing protection, gloves and work apron,
capable of arresting small fragments of the abrasive material or work piece, as
appropriate. Eye protection has to be capable of arresting flying fragments, generated
during various work activities. Dust mask or respirator has to be able of filtering particles,
generated during a particular activity. Long-term exposure to high-intensity noise can cause
loss of hearing.
Bystanders have to keep a safe distance from the working area. Everyone entering the
working area has to use personal protective equipment. Fragment of the work piece or
damaged accessories may fly away and cause injury even outside the immediate working
area.
During work, during which the tool can touch a hidden wiring or its own power supply, the
electromechanical tool has to be held by the insulated holding surfaces. Contact of the tool
with a "live" wire can cause the metallic parts of the electromechanical tool to become "live"
and may cause an injury by electric current.
Mobile power supply has to be placed outside the reach of the rotating tool. In case the
operator looses control, the mobile power supply can be cut or ground through, and a hand
or arm of the operator may be dragged to the rotating tool.
Electromechanical tool may not be put down before the tool stops completely. Rotating tool
may get caught on a surface and may pull the tool out of the operator's control.
Electromechanical tool may not be started while the tool is carried by the operator. Rotating
tool may, in case of a accidental contact, catch clothing and be pulled to the body.
Ventilation holes of the tool have to the cleaned regularly. The motor ventilator brags dust
into the casing and excessive accumulation of metallic dust can cause an electric hazard.
Work with electromechanical tool in the vicinity of flammable materials is prohibited.
Ignition of the materials by sparks may occur.
Use of accessories requiring cooling by liquid is prohibited. Use of water or other coolants
may cause injury or death by electric current.
Summary of Contents for FDBP 200951-E
Page 1: ...FDBP 200951 E...
Page 2: ...3 A...
