Fieldmann FDV 1004-A, User Manual

FDV 1004-A

Instructions for proper use | Operating instructions

More advice about drilling

1.   We recommend to secure the workpiece to the workbench so that you achieve the best results and safely

operate the tool.

2.   Use only sharpened drill bits. Blunt drill bits put an unnecessary load on the drill and may cause the motor to 

burn.

3.  Always ensure that you are using the correct working tool for the task being performed.
4.    When performing high precision drilling it is best to use a drill bit with a guiding rod.  Non-ferrous materials 

like thin metal sheets are very diffi cult to drill. When performing high precision drilling place a piece of wood 
underneath the drilled material and then drill an opening through both pieces of material.

ATTENTION: 

When drilling it is not unusual for the drill bit to jam. In such a case there is a large momentum 

reaction. Always pay attention to what you are doing and hold the drill fi rmly to prevent possible damage or 
injury.

ATTENTION:

 Do not hold the trigger button down in the on position using adhesive tape or by other means. 

The electrical circuit in the tool would not work correctly, which could lead to overheating and subsequent 
damage to the tool.

Overload

If the tool becomes overloaded, the motor may be damaged. Increased pressure on the tool will not result in 
speeding up work. The effect of greater pressure on the tool will only lower effectiveness, which may cause the 
battery to go fl at prematurely and may also destroy the motor. Non-standard types of work and the effect of 
excessive pressure will shorten the operating lifetime of the tool.

6. OPERATING INSTRUCTIONS

Operation

   This product must not be used by children and persons with physical or mental impairments or by 

inexperienced persons, unless properly trained or schooled in the safe use of the product, or unless they 
have been properly supervised by a qualifi ed person who will be responsible for their safety.
 Use extra care if the product is used near children. Always keep the appliance out of reach of children. 
Children must be supervised to ensure that they do not play with the product.
 Never allow children or persons who do not know the contents of this user's manual to work with the device. 
Local regulations may set the minimum age of the user. The user is responsible for damages caused to third 
parties in the machine's working area as a result of its use. 
Do not use the machine if your are tired, under the infl uence of alcohol or narcotics.
  If necessary, use personal protection aids (gloves, work footwear, eye protection, respirators, etc.). Personal 
protection aids reduce the risk of injury to persons.
 Dress appropriately. Do not wear loose clothing or jewellery and make sure that your hair, clothing or gloves 
do not come dangerously close to moving parts. Loose clothing, jewellery or long hair may become caught 
in the moving parts.

EN

1

5