EN
8
FVC 6010 B
Operating instructions
Do not use the machine to pump combustible or corrosive substances.
Do not install the pump impeller or housing on other engines or prime movers.
Each time before starting to work, make sure that no rivets or fasteners are loose or missing.
Do not use the pump for purposes other than recommended by the manufacturer in the user’s manual.
Please note that the owner and/or staff member is responsible for injuries or dangers incurred to third
persons or their property.
Safety instructions
Fuel
The fuel tank must be empty while the pump is being transported.
The fuels are to be transported in approved canisters only.
Please check the fuel tank cap regularly. It must be tightened and fuel must not leak out
Protect the environment: take care to prevent the fuel leakage and soil contamination.
Start the machine at least 3m from the fuel refi lling location.
Never refi ll the fuel in enclosed areas. There must be suffi cient ventilation in the room, risk of an explosion.
Do not inhale the fuel vapours. Wear safety gloves while refi lling the fuel.
Change and clean the protective clothes on regular basis.
ATTENTION!
If instructions are not followed, there is a danger of a serious or even fatal
Injury to persons!
Please make sure that all persons working with this machine are familiar with the machine operation and the
safety instructions.
Summary of Contents for FVC 6010 B
Page 1: ...FVC 6010 B ...
