11
OPERATION MANUAL
GARDEN SHREDDER
EN
Safety measures and instructions
Before the first use of this product, read the instructions below and check whether:
- The power supply cable sheath is safely secured by a terminal.
- The extension cable sheath is not damaged.
- The cable(s) is/are led so that risk of damage or accidental switch-off is eliminated.
- The power supply cable is unreeled from the coil completely so that not to get overheated.
WARNING!
Do not overlook!
When switching-on the equipment supplied by alternating electric power, you may notice a
short voltage drop. This drop may influence even other devices (for instance flickering of
lights). However, if alternating electric supply current impedance (Zmax) is less than 0.40
Ohm at 50Hz, there is no fear of this failure. Contact your local electricity supplier for more
information.
Use an extension cable for outdoor applications
When using the shredder outdoors, use only extension cables intended for outdoor
applications for connecting to the mains.
Keep the working area clean!
Mess and dirtiness may cause accidents.
Mind suitable working conditions
Do not let the electrical equipment subject to rain.
Do not use the electrical equipment in rain or in humid weather.
The working area must be well lit.
Do not use the electrical equipment in a hazardous flammable or explosive atmosphere.
Protect yourself against electrical shock!
Avoid physical contact with earthed objects, e.g. pipes, cables etc.
WARNING!
Be careful about children and animals!
Do not allow any comers to touch the machine or the extension cable. Keep all bystanders,
particularly children and animals, away from the working area.
If not using the machine, store it!
If not using the equipment, store it in a dry place out of the reach of children.
Summary of Contents for FZD 4010-E
Page 1: ...FZD 4010 E...
Page 3: ...3 4 2 3 5 10 11 8 a b c d...
