15
OPERATION MANUAL
GASOLINE BRUSH CUTTER
EN
Maintenance and storage
Lubricate the gearbox.
Recheck the assembly after maintenance and recheck tightening of all screws, bolts and
nuts.
Check carefully whether fuel liquid is not leaking.
Service
In the case you find-out any defect after having purchased the product, contact the service
department. When using the product, follow instructions given in the operation manual.
Your claim will not be taken into consideration if you have modified the product or have not
adhered to instructions given in this operation manual.
Warranty does not cover
Natural wear of functional parts of the machine in consequence of its use
Service interventions relating to the standard maintenance of the machine (e.g. cleaning,
lubricating, adjusting, etc.)
Faults caused by outer influences (e.g. climatic conditions, dustiness, unsuitable use, etc.)
Mechanical damage resulting from a fall of the machine, shock, impact, etc.
Damages resulting from unskilled handling, overloading, the use of improper parts,
unsuitable tools etc. The risk of possible damage of claimed products which have not been
secured against mechanical damage during the transport properly is born exclusively by the
owner.
Storage
WARNING!
If not using the machine for a longer time, store it according to the following
instructions. Thus you will prolong the service life of your machine.
Drain fuel from the fuel tank and carburetor completely. Close the primer and pull the starter
3 – 5 times.
Unscrew the spark plug and put a small amount of engine oil into the hole. Pull the starter
2 – 3 times gently.
Clean outer surfaces by a clean cloth. Store the machine in a clean and dry place.
