WARNING – SERIOUS INJURY HAZARD
Dismounting Instructions
1)
Before disconnecting the Post Driver ensure that the weight has been lowered to base of the mast.
2)
Position storage foot to the rear, and secure – Fit safety/transport bar over side tilt ram if supplied for added
safety
3)
Lower the Post Driver so that all three legs are touching the ground.
4)
Disconnect the pressure hydraulic supply hose and then the return hose.
5)
Slacken off the top link and remove the hitch pin. Ensure that the Post Driver is in a stable position.
6)
Remove the hitch pins from the plough arms.
7)
Check that nothing is connected to the tractor before driving off.
8)
When Post Driver is disconnected from the tractor, do not leave free standing. Tie or chain mast up high to a
strong vertical member, as strong winds or an unintended knock could allow the post driver to fall over.
