FieldServer FPC-N34: FPC-N35, Installation & Operating Instructions Manual

3

TABLE OF CONTENTS

1. INTRODUCTION ..................................................... 4

BTL Mark – BACnet Testing Laboratory  .................4
LonMark Certification ..............................................4

2.  INTERFACING THE PROTONODE TO RAYPAK 

PRODUCTS ............................................................. 5

ProtoNode RER (FPC-N34) and LER (FPC-N35) 

showing connection ports ..............................5

3.  BACNET/LONWORKS SETUP FOR 

PROTOCESSOR PROTONODE RER/LER ......... 6

Installation steps for the customer ..........................6
Record Identification Data .......................................6
Configure Raypak VERSA IC Modbus 

COM Settings ................................................6

Select the Desired Field Protocol – for ProtoNode 

RER (FPC-N34) .............................................7

Using S0 – S3 bank of DIP Switches  .....................7
BACnet MS/TP, BACnet/IP, Modbus TCP, and 

Metasys N2 Settings for ProtoNode RER 

(FPC-N34)  ....................................................7

Setting the Device Instance (Node-ID) for BACnet 

MS/TP and BACnet/IP on ProtoNode RER 

(FPC-N34) .....................................................7

Setting the Node-ID for Metasys N2 and Modbus 

TCP on ProtoNode RER (FPC-N34) .............7

Setting the MAC Address for BACnet MS/TP for the 

ProtoNode RER (FPC-N34) ...........................8

Set Field RS-485 Baud Rate for BACnet MS/TP on 

ProtoNode RER (FPC-N34)  ..........................8

Setting the Serial Baud Rate (DIP Switch B0 – B3) 

for BACnet MS/TP  ........................................8

Wiring Connections to ProtoNode RER (FPC-N34 

BACnet) and ProtoNode LER (FPC-N35 

LonWorks) .....................................................

9

Connecting the VERSA IC Modbus port to the 

ProtoNode’s Phoenix 6 pin connector. ...........

9

Wiring the ProtoNode RER to RS-485 Field Protocol 

(BACnet MS/TP or Metasys N2) .................. 11

Wiring the ProtoNode LER (FPC-N35) Field Port to a 

LonWorks network ....................................... 11

Power-Up the ProtoNode RER (FPC-N34 BACnet) 

or ProtoNode LER (FPC-N35 LonWorks) .... 12

4.  CONNECT TO THE PROTONODE’S WEB 

CONFIGURATOR TO SETUP THE RAYPAK 

PRODUCTS (PROFILES) CONNECTED TO THE 

PROTONODE RER OR LER  .............................. 12

Connect the PC to the ProtoNode via the Ethernet 

port ...............................................................12

Configure Profiles in the ProtoNode’s Web 

Configurator .................................................13

Selecting the Raypak profiles that will be connected 

the ProtoNode ..............................................13

Changing BN_Node_Offset via the ProtoNode’s Web 

Configurator .................................................15

Set IP Address for BACnet/IP via GUI ..................15

5.  COMMISSIONING THE PROTONODE LER ON A 

LONWORKS NETWORK ..................................... 16

Commissioning the ProtoNode LER on a LonWorks 

network ........................................................16

Instructions to Upload XIF File From the ProtoNode 

LER Using FS GUI Web Server ...................16

6.  CHIPKIN AUTOMATION’S CAS BACNET 

EXPLORER FOR VALIDATING THE 

PROTONODE IN THE FIELD .............................. 17

Downloading Chipkin Automation’s CAS Explorer 

and Requesting an Activation Key  ..............17

CAS BACnet Setup ...............................................18
CAS BACnet MS/TP Setup ...................................18
CAS BACnet BACnet/IP Setup .............................18

7.  APPENDIX A. TROUBLESHOOTING ................ 18

Check Wiring and Settings ....................................18
Take Diagnostic Capture With the FieldServer 

Utilities .........................................................18

Setting the Network Number for BACnet IP ..........20
LED Diagnostics for Modbus RTU Communications 

between the ProtoNode and Raypak VERSA 

IC .................................................................20

8.  APPENDIX B. PICS STATEMENT ...................... 21

Raypak VERSA IC Modbus RTU Mappings to 

BACnet MS/TP, BACnet/IP, Metasys N2 and 

LonWorks .....................................................21

Address DIP Switch Settings ................................24

9.  APPENDIX C. REFERENCE ............................... 26

Specifications ........................................................26
Compliance with UL Regulations ..........................26

10. LIMITED 2 YEAR WARRANTY ........................... 27

APPROVED 

UNCONTROLLED DOCUMENT IF PRINTED