Triangle Tube’s ProtoNode Startup Guide
Page 10 of 40
ProtoCessor
1991 Tarob Court Milpitas, California 95035 USA
Web
2.3.2 BACnet MS/TP (FPC-N34): Setting the MAC Address BACnet Networks
Figure 4: MAC Address DIP Switches
The following chart describes the DIP switch settings for the Prestige and Keystone to support
LonWorks
on a
ProtoNode FPC-N35.
Cover doesn’t need to be removed
ProtoCarrier DIP Switches
Profile -
FPC-N35-103-401-0823
S0
S1
S2
S3
1 Prestige to Lonworks
Off Off Off
Off
2 Prestige to Lonworks
On
Off Off
Off
3 Prestige to Lonworks
Off On
Off
Off
4 Prestige to Lonworks
On
On
Off
Off
5 Prestige to Lonworks
Off Off On
Off
6 Prestige to Lonworks
On
Off On
Off
7 Prestige to Lonworks
Off On
On
Off
8 Prestige to Lonworks
On
On
On
Off
1 Keystone to Lonworks
Off Off Off
On
2 Keystone to Lonworks
On
Off Off
On
3 Keystone to Lonworks
Off On
Off
On
4 Keystone to Lonworks
On
On
Off
On
5 Keystone to Lonworks
Off Off On
On
6 Keystone to Lonworks
On
Off On
On
7 Keystone to Lonworks
Off On
On
On
8 Keystone to Lonworks
On
On
On
On
NOTE:
When setting DIP Switches, please ensure that power to the board is OFF.
•
Only 1 MAC address is set for ProtoNode regardless of how many devices are connected to
ProtoNode.
•
Set the BACnet MS/TP MAC address of the ProtoNode to a value between 1 to 127 (MAC Master
Address); this is so that the BMS Front End can find the ProtoNode via BACnet auto discovery.
•
Note: Never set a BACnet MS/TP MAC Address from 128 to 255
. Addresses from 128 to 255 are
Slave Addresses and can not be discovered by BMS Front Ends that support auto discovery of BACnet
MS/TP devices.
•
Set DIP switches A0 – A7 to assign MAC Address for BACnet MS/TP for the ProtoNode FPC-N34.
•
Please refer to
Appendix D.1
for the complete range of MAC Addresses and DIP switch settings.
NOTE:
When setting DIP Switches, please ensure that power to the board is OFF.
2.3.1.2 LonWorks DIP Switch Settings
