1
1-28
Installing User Software on a Windows Computer
Before you continue, contact the system administrator for the IP address assigned to
the Fiery, as well as the subnet mask and the gateway address, if they are used.
The TCP/IP protocol should already be installed on the Windows NT computer.
T
O
SET
UP
TCP/IP
AND
LPR
PRINTING
FOR
W
INDOWS
NT 4.0
1.
Open the Properties dialog box for the Fiery, and click the Ports tab.
2.
Click Add Port.
The available port types are displayed.
3.
Select LPR Port and click New Port.
If the LPR port is not listed, install the TCP/IP network protocol and
Microsoft TCP/IP printing software. See your Windows documentation.
4.
Enter the IP address of the Fiery.
If your network uses Domain Name Services (DNS), enter the DNS name assigned to
the Fiery instead of the IP address.
