manualshive.com logo in svg

Fiery Fiery EX2101, Job Management Manual

Introducing the Fiery Fiery EX2101 - your perfect solution for advanced job management. Take control of your printing tasks with our comprehensive manual, available for free download at 88.208.23.73:8080. Unlock the full potential of this remarkable product and optimize your workflow effortlessly with our user-friendly manual.

Share
Download
background image

 

License

 

EFI grants you a non-exclusive license to use the Software and accompanying documentation (“Documentation”) included with the Product. The Software is 
licensed, not sold. You may use the Software solely for your own customary business or personal purposes. You may not rent, lease, sublicense or lend the Software 
or use the Software in any time sharing, service bureau, or similar arrangement. 

You may not make or have made, or permit to be made, any copies of the Software or portions thereof, except one (1) copy for backup or archive purposes in 
support of your use of the Software as permitted hereunder. You may not copy the Documentation. You may not attempt to localize, translate, disassemble, 
decompile, decrypt, reverse engineer, discover the source code of, modify, create derivative works of, or in any way change any part of the Software.

The terms, conditions, and restrictions in the License Agreement apply to all bug fixes, patches, releases, release notes, updates, and upgrades related to the 
Software.

 

Proprietary Rights

 

You acknowledge and agree that all rights, title and interest, including all intellectual property rights, in and relating to the Software, Documentation and all 
modifications and derivative works thereof are solely owned by and shall remain with EFI and its suppliers. Except for the express limited license granted above 
to use the Software, no right or license of any kind is granted. You receive no rights or license under any patents, copyrights, trade secrets, or trademarks (whether 
registered or unregistered). You agree not to adopt, register, or attempt to register any EFI trademark or trade name (“EFI Mark”) or any confusingly similar mark, 
URL, internet domain name, or symbol as your own name or the name of your affiliates or products, and not to take any other action which impairs or reduces 
the trademark rights of EFI or its suppliers. 

 

Confidentiality

 

The Software is confidential, proprietary information of EFI and you may not distribute or disclose the Software. You may, however, permanently transfer all of 
your rights under this Agreement to another person or legal entity provided that: (1) such a transfer is authorized under all applicable export laws and regulations, 
including the U.S. Export Administration Regulations, (2) you transfer to the person or entity all of the Software and Documentation (including all copies, 
updates, upgrades, prior versions, component parts, the media and printed materials, and this Agreement); (3) you retain no copies of the Software and 
Documentation, including copies stored on a computer; and (4) the recipient agrees to the terms and conditions of this Agreement. 

 

Remedies and Termination

 

Unauthorized use, copying, or disclosure of the Software, or any breach of this Agreement will result in automatic termination of this license and will make 
available to EFI other legal remedies. In the event of termination, you must destroy all copies of the Software, Documentation, and all component parts thereof. 
All provisions of this Agreement relating to disclaimers of warranties, limitation of liability, remedies, damages, governing law, jurisdiction, venue, and EFI’s 
proprietary rights shall survive termination.

 

Limited Warranty and Disclaimer

 

EFI warrants to the original purchaser (“Customer”) for thirty (30) days from the date of original purchase from EFI or its authorized retailer that the Software 
will perform in substantial conformance to the Documentation when the Product is used as authorized by EFI’s specifications. EFI warrants the media containing 
the Software against failure during the above warranty period. EFI makes no warranty or representation that the Software will meet your specific requirements, 
that the operation of the Software will be uninterrupted, secure, fault-tolerant, or error free, or that all defects in the Software will be corrected. EFI makes no 
warranty, implied or otherwise, regarding the performance or reliability of any third party products (software or hardware. THE INSTALLATION OF ANY 
THIRD PARTY PRODUCTS OTHER THAN AS AUTHORIZED BY EFI WILL VOID THIS WARRANTY. IN ADDITION, USE, MODIFICATION, 
AND/OR REPAIR OF THE PRODUCT OTHER THAN AS AUTHORIZED BY EFI WILL VOID THIS WARRANTY.

EXCEPT FOR THE ABOVE EXPRESS LIMITED WARRANTY AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EFI 
MAKES AND YOU RECEIVE NO WARRANTIES OR CONDITIONS ON THE SOFTWARE, EXPRESS, IMPLIED, STATUTORY, OR IN ANY 
OTHER PROVISION OF THIS AGREEMENT OR COMMUNICATION WITH YOU, AND EFI SPECIFICALLY DISCLAIMS ANY IMPLIED 
WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF THIRD 
PARTY RIGHTS. 

Summary of Contents for Fiery EX2101























































































































































































































Reviews:

No comments

Related manuals for Fiery EX2101

Blackberry MAIL - BROWSING SMARTPHONE User Manual preview
MAIL - BROWSING SMARTPHONE
Brand: Blackberry Pages: 25
Allied Telesis AlliedWare Plus 5.2.1 Software Reference Manual preview
AlliedWare Plus 5.2.1
Brand: Allied Telesis Pages: 1294
Snom Configuring snom phones for Mass Deployment Frequently Asked Questions Manual preview
Configuring snom phones for Mass Deployment
Brand: Snom Pages: 22
Hamlet Exagerate ZELIG-CAM PRO User Manual preview
Exagerate ZELIG-CAM PRO
Brand: Hamlet Pages: 6
Fargo Persona Persona M30e User Manual preview
Persona Persona M30e
Brand: Fargo Pages: 31
Brocade Communications Systems IronWare Release Note preview
IronWare
Brand: Brocade Communications Systems Pages: 40
Brocade Communications Systems Brocade BladeSystem 4/24 Administrator'S Manual preview
Brocade BladeSystem 4/24
Brand: Brocade Communications Systems Pages: 62
Brocade Communications Systems Fabric OS v7.0.1 Command Reference Manual preview
Fabric OS v7.0.1
Brand: Brocade Communications Systems Pages: 1132
Ulead DVD MOVIEFACTORY-DVD PLUG-IN Manual preview
DVD MOVIEFACTORY-DVD PLUG-IN
Brand: Ulead Pages: 8
Ulead DVD DISCRECORDER 2.3 User Manual preview
DVD DISCRECORDER 2.3
Brand: Ulead Pages: 15
Ulead DVD DISCRECORDER 2.2 User Manual preview
DVD DISCRECORDER 2.2
Brand: Ulead Pages: 16
Denon DP-200USB Owner'S Manual preview
DP-200USB
Brand: Denon Pages: 29
F-SECURE LINUX SECURITY Manual preview
LINUX SECURITY
Brand: F-SECURE Pages: 219
UNIBLUE PowerSuite 2010 Product Manual preview
PowerSuite 2010
Brand: UNIBLUE Pages: 13
Nikon 25338 User Manual preview
25338
Brand: Nikon Pages: 240
3M MicroTouch MT7 User Manual preview
MicroTouch MT7
Brand: 3M Pages: 57
MACROMEDIA BREEZE-FOR MEETING PRESENTERS Manual preview
BREEZE-FOR MEETING PRESENTERS
Brand: MACROMEDIA Pages: 96
KAPERSKY ANTI-VIRUS 5.5 - FOR CHECK POINT FIREWALL-1 Administrator'S Manual preview
ANTI-VIRUS 5.5 - FOR CHECK POINT FIREWALL-1
Brand: KAPERSKY Pages: 141

Brands by name

Popular brands

Load more brands