3
3-13
Performing Setup from WebSetup
Add NDS Tree
You can have only one NDS tree, so the following process is required to change
trees:
1.
Select the current NDS tree and click Remove.
2.
Select the new NDS tree and click Add.
Your new NDS tree selection automatically overwrites any previous tree
selection. If you change the NDS tree selection and there are also current
Bindery settings, you are alerted that they will be deleted. If you
continue with NDS Setup, you can replace Bindery settings afterwards.
To exit NDS Setup, choose
Cancel
.
3.
Click OK.
The Select login user window appears.
Select Login User
1.
Select the User Login object from the display in the Select Login User
window.
2.
Enter a password if necessary.
3.
Click OK.
The Select print server window appears.
Select Print Server
1.
Select the print server from the display in the Select Print Server window.
2.
Enter a password if necessary.
3.
Click OK.
The Select print queue root window appears.
Select Print Queue
Root
1.
Select the print queue root from the display in the Select Print Queue Root
window.
2.
Enter a password if necessary.
3.
Click Finish.
The NetWare Setup window reappears, showing the new settings.
Enter Print Server
Password
1.
Enter the Print Server password, using the up and down buttons to enter
characters, and the left and right arrow buttons to move the cursor.
2.
Choose OK. (If no password is required, choose OK.)
