3-2 Selecting the Destination (Continued)
51
Chapter 3 : Using the Scanning Features
Setting the destination by manual inputting
If you have selected the other transmission object or destination, skip the procedure 1 to retain and edit the set-
tings you have made already.
1.
Press [SCAN] button on the control panel.
The [Select Transmission Object] screen is displayed on the LCD screen.
•
U.S.A.
•
Others
2.
Make sure that [E-Mail] is selected.
When [E-Mail] is not selected, touch [E-Mail].
You can exit the selected transmission object mode by touching the same button again.
3.
Touch [Address manual input] ([MANUAL I/P ADDRESS]).
The [Transmission Address Input] screen appears.
When you select the [E-Mail] again after using the Scan to E-Mail without escaping the Scan mode, the Entry
Name and the E-Mail Address which you input before are displayed.
4.
Make sure that [Entry Name] is selected.
When [Entry Name] is not selected, touch [Entry Name].
