3-2 Selecting the Destination (Continued)
54
Chapter 3 : Using the Scanning Features
Setting the Title
The Title of the E-Mail is " ’Filename’ has been scanned." (Default). However, when you select the [E-Mail] again after using
the Scan to E-Mail without escaping the Scan mode, the Title which you inputted before remains.
Change the Title as follows:
1.
Touch [TITLE] on the [Select Transmission Object] screen (E-Mail) or the [Transmis-
sion Address Input] screen.
The [Title Input] screen appears.
2.
Touch [Input key indicate].
The [Keyboard Input] screen appears.
3.
Input the Title of the E-Mail Address and touch [OK].
The display returns to the [Select Transmission Object] screen or the [Transmission Address Input] screen.
•
The Title should not exceed 45 alphanumeric characters.
•
Input numbers with the Keypad of the control panel.
•
For information about inputting text, please refer to “Inputting Text” on page 25.
