3-6 Checking Status and Scanner Settings (Continued)
86
Chapter 3 : Using the Scanning Features
3.
Change settings and touch [OK].
When you select the item on procedure 1 that has settings on the [Scanner setting basic] screen, the screen returns to
the [CHECK MODE] screen.
Then, you can confirm the contents of settings you changed on procedure 2 on this screen.
•
U.S.A.
•
Others
If you select an item on procedure 1 which does not have settings on the [Scanner setting basic] screen, the screen
returns to the [Scanner setting basic] screen.
In this case, you can do usual procedures you need and scan the document.
You can also return to the [CHECK MODE] screen by pressing the [CHECK] button on the control panel.
When you change the other setting sequentially, follow the same procedure from step 1 to 3.
4.
To exit the [CHECK MODE] screen, touch [EXIT].
